Skip to content
English
Contact
  • There are no suggestions because the search field is empty.

Checking Into A Storage Location

These steps will walk you through the check-in process for your storage locations.

Step 1: Open the Location Menu

 

Before scanning make sure the storage unit follows the Inventory Basics guidelines.

  1. Tap on the desired job to open the Locations Menu.
  2. Select Check In on a location and follow the on-screen prompts for check-in method.

    Location menu

  3.  If the location is a Quick List, tap Check-in then enter quantities for all listed items.

Popeyes QL Location-1

 

Untitled design (4)-1-1Troubleshooting Tip: Select the wrong location? Swipe the Done slider at the bottom of the screen then tap the Location Tracker icon to exit. Don’t forget to come back and finish the location!

 

Step 2: Follow the on-screen prompt

  1. Hold the device steady and parallel to the shelf.
  2. Focus the viewfinder on the QR Code at a close distance – get within 6 inches of the QR Code.
  3. A green label will appear when check-in is successful.

 

 

Troubleshooting Tip: Make sure the NomadGo logo on your QR Code label is right-side up. If you can't read it, neither can the device.

Labels Final